THE EFFECT OF SURFACE TREATMENT ON HIGH-FREQUENCY SMAT TECHNOLOGY ON THE MECHANICAL PROPERTIES OF SURFACE COPPER
Main Article Content
Abstract
Nanostructured materials are characterized by a specific structure compared to polycrystalline materials. Nanostructured materials are created in way of strong deformations. SMAT (surface mechanical attrition treatment) technology consists in the treatment of the surface of a material with steel balls accelerated by a generator of high-frequency oscillations (about 20 kHz). This changes the mechanical properties of the materials. The size of graines in such materials decreases in the direction from the volume of the crystal to the surface. As a result of SMAT processing, graines become nanosized near the surface of the samples. Such materials have a large number of subsurface defects formed as a result of
intense plastic deformation, which determines their thermodynamic and diffusion
characteristics.
The purpose of this work is to develop the device of high-frequency (20 kHz) surface machining by attrition using SMAT technology and its application to the treatment of surfaces, both polished copper plates and electrodeposited in a stationary mode to copper plates with copper layers.
In this work, the device is developed and the technology of high-frequency mechanical surface treatment of SMAT is described. The design features and technical characteristics of the experimental plant are presented. In the work, the surfaces of copper substrates were processed by different methods: grinding and polishing of copper polycrystalline plates, electrolytic deposition of copper surface layers on these plates, processing of prototypes by SMAT technology. The microhardness was measured in the surface layers of the linings made using different technologies and their comparative characteristics were performed.
It is established that high-frequency surface treatment of plates by SMAT technology increases the microhardness of the surface of copper plates of different types, both polished and with electrolytically deposited copper. The results of the research showed that the sample, which was subjected to electrolytic deposition of copper, has a high defectiveness of the surface and reduced microhardness. After processing such a sample using SMAT technology, it is obtained a hardness higher than the reference polycrystalline copper sample.
Article Details
References
Chan H. (2010). Development of SMAT and electrodeposition process for generating nanostructured materials and study of their tensile properties. The Hong Kong Polytechnic University, 21, 190. Retrieved from http://ira.lib.polyu.edu.hk/bitstream/10397/3185/2/b23744820_ir.pdf
Glaiter H. (2000). Nanostructured materials: basic concepts and microstructure. Acta Materialia, 48, 1-29. Retrieved from https://doi.org/10.1016/S1359-6454(99)00285-2
Mazilkin A. A., Straumal B. B., Protasova S. G. (2007). Structural changes in aluminum
alloys with intensive plastic deformation. FTT (FTT), 49(5), 824-829. Retrieved from
http://www.issp.ac.ru/libm/papers/184.pdf
Lu K., Lu J. (1999). Surface nanocrystallization (SNC) of metallic materials-presentation of the concept behind a new approach. J Mater Sci Technol, 15, 193. Retrieved from http://www.jmst.org/CN/Y1999/V15/I03/193#1
Lu K., Lu J. (2004). Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment. Materials Science and Engineering: A, 375-377, 38-45. Retrieved from https://doi.org/10.1016/j.msea.2003.10.261
Zhang Y. S., Han Z., Wang K., Lu K. (2006). Friction and wear behaviors of nanocrystalline surface layer of pure copper. Wear, 260, 942-948. Retrieved from https://doi.org/10.1016/j.wear.2005.06.010
Dai K., Shaw L. (2007). Comparison between shot peening and surface nanocrystallization. Materials Science and Engineering A 463, 46-53. Retrieved from https://doi.org/10.1016/j.msea.2006.07.159
Cao Sh. C., Zhang X., Lu J., Wang Y., Shi S.-Q., Ritchie R.(2019). Predicting surface deformation during mechanical attrition of metallic alloys, Computational Materials, 5, 36, 1-15. Retrieved from https://doi.org/10.1038/s41524-019-0171-6
Zhang X. Ch., Lu J., Shi S.-Q. (2011). A computational study of plastic deformation in AISI 304 induced by surface mechanical attrition treatment, Mechanics of Advanced Materials and Structure, 18, 572-577. Retrieved from https://doi.org/10.1080/15376494.2011.621828
Derev’yanko S. І., Tiutenko V. M., Korol Ya. D., Lyashenko Yi. O. (2016). Investigation of the influence of surface mechanical treatment of friction on the technology of SMAT on the properties of electrically deposited layers of copper. Visnyk Cherkaskoho Universytetu. Seriia «Fizyko-Matematychni Nauky» (Bulletin of Cherkasy University. Series "Physics and Mathematics"), 1, 44-45. Retrieved from http://irbis-nbuv.gov.ua/cgi-bin/irbis_nbuv/cgiirbis_64.exe?C21COM=2&I21DBN=UJRN&P21DBN=UJRN&IMA
GE_FILE_DOWNLOAD=1&Image_file_name=PDF/VchuFM_2016_1_8.pdf
Tiutenko V. M., Morozovych V. V., Diduk V. A., Kolinko S. O., Lyashenko Yi. O. (2017). The influence of SMAT processing on microstructure of copper films electroplated in steady-state, reversed impulse and stochastic regimes. Visnyk Cherkaskoho Universytetu. Seriia «Fizyko-Matematychni Nauky» (Bulletin of Cherkasy University. Series "Physics and Mathematics"), 1, 63-78. Retrieved from http://phys-ejournal.cdu.edu.ua/article/view/2334/2406
Prykhodko V. I., Vysokolyan М. V., Volochai V. V., Prokopenko G. І., Mordyuk B. N., Cherepin V. Т., Krasovskiy Т. А., Popova Т. V. (2014). Creation of ultrasonic equipment for strengthening and relaxation treatment of the welded constructions in carriage
building, Science and innovation, 10, 1, 5-17. Retrieved from