MORPHOLOGICAL STRUCTURE OF GALVANIZED COPPER LAYERS IN INHOMOGENEOUS REGIMES

Main Article Content

V. V. Morozovych
Yu. O. Lyashenko

Abstract

The microstructure of copper layers obtained by electrodeposition in stationary, pulsed and stochastic modes on copper substrates was studied by means of scanning electron microscopy. It was found that the shape of the applied grains differs significantly in the case of pulsed and stationary application modes.


The technology of production of electrodeposited layers in stationary, pulse and stochastic modes of copper on copper substrates is worked out in the work. The developed automated software and hardware complex was used to control the electrodeposition process.


The effect of electrodeposition in different modes on the structure of copper surface layers was investigated using scanning electron microscopy. Qualitative examination of SEM images of electrodeposited surfaces showed that in the case of stochastic and stationary modes of electrodeposition, a coating with a larger grain size is formed than in the case of pulsed deposition.


It should also be noted that the shape of the applied grains is significantly different in the case of pulsed and stationary application modes. In the process of electrodeposition in the stationary mode, sediment is formed in the form of conglomerates of grains of different sizes, while in the pulse mode, a uniform grain structure is formed. The shape of the grains formed in the process of electrodeposition in the stochastic mode is different in that the coating has areas with evenly distributed grains and conglomerates of grains.


The average grain size in the electrodeposited layers obtained using the pulse mode increases with increasing pulse period. It was also found that the average grain size is smaller in the case of the stochastic application method than in the case of the pulsed method, for the same average current density

Article Details

Section
Materials Physics
Author Biographies

V. V. Morozovych, The Bohdan Khmelnytsky National University of Cherkasy

Post-graduate student of the Department of Physics,

The Bohdan Khmelnytsky National University of Cherkasy, Cherkasy, Ukraine

Yu. O. Lyashenko, The Bohdan Khmelnytsky National University of Cherkasy

Doctor of physical and mathematical sciences, Associate Professor,

Director of Educational and Scientific Institute of Information and Educational Technologies,

The Bohdan Khmelnytsky National University of Cherkasy, Cherkasy, Ukraine

References

Morozovych, V. V., Honda, A. R., Lyashenko, Y. O., Korol, Y. D., Liashenko, O. Y., Cserhati, С., & Gusak, A. M. (2018). Influence of copper pretreatment on the phase and pore formations in the solid phase reactions of copper with tin. Metallofiz. Noveishie Tekhnol, 40(12), 1649-1673. Retrieved from https://doi.org/10.15407/mfint.40.12.1649

Belenkyi M. A., Ivanov A. F. (1985). Electrodeposition of metal coatings: Handbook. Moscow: Metallurgy (in Rus). Retrieved from https://www.nehudlit.ru/books/detail6841.html

Morozovych, V. V., Korol, Y. D., Lyashenko, Y. O. (2018). Structural state of electrodeposited copper layers. Visnyk Cherkaskoho Universytetu. Seriia «Fizyko-Matematychni Nauky» (Bulletin of Cherkasy University. Series "Physics and Mathematics"), (1), 50-59. Retrieved from https://doi.org/10.31651/2076-5851-2018-1-50-59

Yesman, A. K., Savchuk, G. K., Yurkevich, N. P., & Zykov, G. L. (2018). Use of the X-ray Method for Determination of Microstresses and Coherent Scattering Regions in Solids. (in Rus). Retrieved from https://rep.bntu.by/handle/data/48430

Shtol'ts A. K., Medvedev A. I., Kurbatov L. V. (2005). X-ray analysis of microstresses and the size of the regions of coherent scattering in polycrystalline materials. Yekaterinburg: GOU-VPO-UTTU-UPI (Yekaterinburg: GO-WEI USTU), 16-17. – Retrieved from https://docplayer.ru/47621595-Rentgenovskiy-analiz-mikronapryazheniy-i-razmera-oblastey-kogerentnogo-rasseyaniya-v-polikristallicheskih-materialah.html

Nіkolenko Yu. V., Diduk V. A., Korol Ya. K., Lyashenko Yu. O. (2016). Development and application of the hardware and software complex in the board by the process of electrolytic deposition of copper in the mode of stochastic oscillations. Visnyk Cherkaskoho Universytetu. Seriia «Fizyko-Matematychni Nauky» (Bulletin of Cherkasy University. Series "Physics and Mathematics"), 1, 27-29. Retrieved from http://phys-ejournal.cdu.edu.ua/article/view/1372/1396

Tiutenko V. M., Morozovych V. V., Diduk V. A., Kolinko S. O., Liashenko Yu. O. (2017). The influence of SMAT processing on microstructure of copper films electroplated in steady-state, reversed impulse and stochastic regimes. Visnyk Cherkaskoho Universytetu. Seriia «Fizyko-Matematychni Nauky» (Bulletin of Cherkasy University. Series "Physics and Mathematics"), (1), 63-78. Retrieved from http://eprints.cdu.edu.ua/id/eprint/4376

Morozovych, V. V., Honda, А. R., Lyashenko, Y. O. (2017) Application of raster electron microscope image pre-processing to improve the identification of structural elements. Visnyk Cherkaskoho Universytetu. Seriia «Prykladna matematyka. Informatyka» (Bulletin of Cherkasy University. Series " Applied Mathematics. Computer Science ") (1-2). pp. 15-24. Retrieved from http://eprints.cdu.edu.ua/id/eprint/4373

Honda, А. R., Morozovych, V. V., Korol Ya. K., Lyashenko Yu. O. (2019). Fractal structure of electrodeposited copper in stochastic regimes and its effect on phase formation in tin reactions. Visnyk Cherkaskoho Universytetu. Seriia «Fizyko-Matematychni Nauky» (Bulletin of Cherkasy University. Series "Physics and Mathematics"), (1), 80-95. Retrieved from https://doi.org/10.31651/2076-5851-2019-1-80-95